Featured image- Arduino-based study on effect of different parameters on cooling of water

Arduino-Based Study on the Effect of Different Parameters on Cooling of Water

Estimated Reading Time: 11 minutes This is another another Arduino-based project that studies the effects of different parameters on cooling of water. A DS18B20 waterproof temperature sensor was used to monitor the temperature of hot water that was allowed to cool. This is used to take temperature readings for cooling water at various room temperatures, mug sizes, and mug materials. Using arduino-based temperature monitoring, this article investigates the influence of these parameters on cooling.

Featured image - Techniques for characterisation of polymeric nanoparticles

Techniques for Characterisation of Polymeric Nanoparticles: A Review

Estimated Reading Time: 12 minutes This review article discusses the various analytical techniques for the characterisation of Polymeric Nanoparticles (PNPs). Because of their distinctive qualities, they have gained a lot of attention in recent years. As a result, knowing their properties is important. In fact, a range of analytical techniques are used to investigate these features. It includes microscopic, spectroscopic, light scattering, and diffraction techniques. This article will provide you with a review of these characterisation methods and how they are used to study the properties of PNPs.

pectin-in-jam-by-Maryam-Vanaee-and-Zahra-Kamali

Pectin In Jam

Estimated Reading Time: 6 minutes Understanding how pectin works will help you make a better quality jam if you’re looking for a tasty homemade jam.
In this article, we will look at how pectin works in jams and why it is important and necessary to add pectin to jams. by Maryam Vanaee, Zahra Kamali and Cademix Institute of Technology

Learning by Doing Ahmad Atash Afzoon Cademix Career Autopilot Event Advantage Austria

Learning By Doing

Estimated Reading Time: 5 minutes In this post, we are going to talk about a topic that is a method of learning known as learning by doing. In this method we learn more effectively when we actually do the activity. Learning by doing is a method of learning that learners can connect with their environment in order to adapt and learn.

Verification of Newton's law of cooling using Arduino - Featured image

Verification of Newton’s Law of Cooling Using Arduino

Estimated Reading Time: 11 minutes The Arduino platform is a free and open source electronics platform. Due to their ease of use and inexpensive cost, Arduino-based projects have gained widespread recognition. This is also an arduino-based project that examines Newton’s law of cooling. A DS18B20 waterproof temperature sensor was used for temperature monitoring. Newton’s law of cooling was validated by using temperature data. This article will discuss the Newton’s law of cooling and serve as a guide for verifying it with an Arduino. In fact, the main focus of the article is the experimental setup for Arduino-based temperature monitoring and the verification of the law.

microscale 3D printing- featured image

Microscale 3D Printing: A Review

Estimated Reading Time: 13 minutes Microscale 3D printing is the use of additive manufacturing techniques to create structures with features as small as a few microns. As the demand for device miniaturisation grows, so does the demand for microscale 3D printing. There are some traditional methods for microfabrication. However, 3D printing processes have been found as a viable way for achieving real 3D microproducts. There are several methods for microscale 3D printing. This article will highlight some of the most essential and effective microscale 3D printing methods. It includes scanning micro stereolithography, projection micro stereolithography, two photon polymerisation, laser induced forward transfer, microscale selective laser sintering, microscale inkjet 3D printing, and micro extrusion 3D printing. This review will also take a glance at some of the uses of microscale 3D printing in the electronics and medical sectors.

Agile management

Agile management In Food Industry during Corona Pandemic

Estimated Reading Time: 7 minutes The recent global crisis COVID-19 has taken over our lives and unrecoverably changed our economy, society and lifestyle. Now how did that affect the food service industry? And what big changes are imminent? In this article, we will discuss how the coronavirus has affected the food industry. In addition, what agile systems can do to adapt businesses to new life.

Benefits-of-Having-Dual-MBTI-Personality-in-Workplace-Samareh-Ghaem-Maghami-Cademix-Magazine

Benefits of Having Dual MBTI Personality in Workplace

Estimated Reading Time: 11 minutes In this article, we review the benefits of having a dual MBTI personality in the workplace. Further, describe the MBTI personality test in general, the benefits of the MBTI test in the workplace. after that, explain why organizations do need to use this test to reach their goals faster. In the end, we compare two different MBTI personality types and explain how a dual MBTI personality can help in the workplace.
By Samareh Ghaem Maghami, Cademix Institute of Technology